Soffits are the flat or grooved boards tucked under the roof overhang (the eaves). They close off the underside of the rafters, keep out birds and wasps, and provide vital ventilation to the roof space. When old timber soffits peel or rot, you can see staining, damp smells and even sagging gutters above. Replacing them with uPVC soffits is a quick, low-maintenance way to smarten the roofline and protect your home.
We work with trusted UK installers who fit replacement soffit boards alongside fascias, guttering and bargeboards for a complete, long-lasting result. If you’re already refreshing windows, doors or conservatories, coordinating the roofline keeps the whole exterior looking sharp.
Why replace soffits?
- Prevents rot and pests getting into the eaves
- Restores correct eaves ventilation to reduce condensation in the loft
- Low maintenance — no sanding or painting every few years
- Cleaner lines and better kerb appeal when paired with new fascias and gutters

Soffit types and materials
- Solid (flat) soffits – strong, tidy finish; can be used with separate circular vents or continuous over-fascia vents.
- Vented soffits – pre-slotted boards giving continuous airflow.
- Hollow tongue-and-groove soffits – lightweight and cost-effective for longer runs and porches.
- Materials: modern uPVC is standard for low maintenance; aluminium and fibre-cement are available on some projects; timber can be specified for heritage properties.
Colours and profiles
Choose classic white, black, anthracite grey or realistic woodgrain foils (oak, rosewood, mahogany). Match to square, ogee or bull-nose fascias, and coordinate guttering colours for a consistent look across the whole roofline.
Ventilation done properly
Good installers will check the roof needs either 10 mm or 25 mm continuous ventilation (depending on roof design), then provide it via vented soffit boards or discreet over-fascia vents with eaves protection trays and bird combs. This prevents felt sag and keeps the loft drier.
Installation steps
Survey and measure • safe access/scaffolding • remove old gutters and fascia/soffit where needed • treat/repair rafter ends • fit eaves trays and vents • install new soffits and fascias • refit or replace gutters • seal, tidy and dispose of waste.
UK price guide (typical supply & fit)
Actual costs depend on access, run lengths and whether fascias/gutters are included. Broad ranges:
- Soffit replacement only: £25 – £45 per linear metre (solid or hollow uPVC)
- Fascia + soffit together (most common): £60 – £100 per linear metre
- Full roofline with new gutters/downpipes: £80 – £150 per linear metre
Indicative totals (front, back and gables):
- Small terrace: £1,100 – £1,900
- Semi-detached: £1,700 – £3,200
- Detached: £2,300 – £5,000+
Extras to allow for: scaffolding/towers, rotten timber repairs, asbestos-cement soffit removal (specialist), dry-verge on gables, additional downpipes, and disposal charges where applicable. Always compare itemised, like-for-like quotes that specify board thickness, vents and accessories.
Standards and warranties
Roofline replacements don’t usually need Building Regulations sign-off, but correct eaves ventilation is essential. If existing soffits are suspected asbestos cement, they must be handled and disposed of by licensed specialists. Look for written product guarantees (often 10–20 years) and workmanship warranties from insured, reputable installers.
Get free soffit quotes
If your eaves are tired or you’re seeing signs of condensation in the loft, it’s time to update the soffits. Request free, no-obligation quotes from trusted local specialists and compare specifications for boards, ventilation, gutters and guarantees to find the best value for your home.
Soffits – FAQs
Do soffits always need vents?
Yes, most pitched roofs require continuous ventilation at the eaves (and sometimes at the ridge). Your installer will choose vented boards or over-fascia vents to meet the requirement.
What’s better: hollow or solid soffits?
Both are durable uPVC options. Solid boards are rigid and ideal near downpipes or corners; hollow boards are lightweight and cost-effective for long straight runs.
Can I replace soffits without changing fascias?
It’s possible, but most homes get better results replacing fascias, soffits and gutters together so everything aligns, ventilates correctly and carries one warranty.
How long do uPVC soffits last?
Quality boards typically come with 10–20-year guarantees and last far longer with simple cleaning.
Will new soffits stop birds nesting?
When fitted with bird combs and correctly closed gaps, yes—this is usually part of a proper roofline install.
Could my old soffits contain asbestos?
Some pre-1999 soffits are asbestos-cement. If suspected, removal must be carried out by specialists, get quotes for asbestos removal. Don’t drill or disturb them yourself.
How long does installation take?
A typical semi-detached home is completed in 1–2 days by a two-person team, longer if significant timber repairs or scaffolding are needed.
What maintenance is required?
Wash the boards once or twice a year, keep gutters clear and check joints after heavy weather. No repainting needed.
