uPVC Bargeboards

white upvc bargeboards replacement

Bargeboards are the boards fixed to the gable ends of a roof (the sloping edges that meet at the apex). They protect the roof timbers from weather, tidy the verge line and finish the look of your home. When timber bargeboards peel, split or rot, wind and rain can get behind the tiles and mortar. Replacing them with uPVC bargeboards delivers a crisp, low-maintenance finish that lasts.

(Here’s a natural spot to add internal links to your Roofline overview, plus companion pages for Fascias, Soffits and uPVC Guttering. You can also signpost to Windows, Doors and Conservatories if you’re refreshing the whole exterior.)

Why replace your bargeboards?

  • Protects exposed verge timbers and under-cloak from the weather
  • Reduces maintenance — no repeated sanding and painting up ladders
  • Helps stabilise verge tiles and tidy failing mortar lines
  • Sharpens kerb appeal with clean, straight edges and colour-matched trims
  • Allows upgrade to dry-fix verges for stronger, ventilated, mortar-free edges

Full replacement vs capping

  • Full replacement (recommended if timber is tired or rotten): remove old boards, inspect/repair rafter feet and under-cloak, then fix 16 mm replacement uPVC bargeboards with proper apex joints and box end details. Ideal time to install dry-fix verge caps for a neat, durable finish.
  • Capping/over-boarding: fit 9 mm capping boards only over sound, dry timber. It’s a budget option and shouldn’t be used to hide rot or loose verge mortar.
white upvc bargeboards

Styles, colours and matching trims

  • Profiles: square, bull-nose and ogee; matching box-end returns where the bargeboard meets the fascia/soffit at the eaves
  • Colours: classic white, black, anthracite grey, and woodgrain foils (oak, rosewood, mahogany)
  • Co-ordination: colour-match to fascias, soffits and guttering for a consistent roofline

How a proper installation runs

Survey & measure • safe access/scaffolding • remove old boards and loose verge mortar • repair/treat timber and under-cloak • fit eaves protection and box ends • install new uPVC bargeboards with stainless fixings • add dry-fix verge (optional) • seal, tidy and dispose of waste.

UK price guide (typical supply & fit)

Actual costs depend on gable length/height, access and whether dry-fix verge is included. Broad ranges:

  • Capping (9 mm) to sound timber: £25 – £45 per linear metre
  • Full replacement bargeboard (16 mm) with box ends: £60 – £110 per linear metre
  • Dry-fix verge upgrade: £300 – £600 per gable (system & length dependent)

Indicative totals:

  • Small gable (semi/terrace): £350 – £900
  • Large gable (detached): £600 – £1,600+

If you do the full roofline package (fascias, soffits and gutters) at the same time, expect overall rates around £80 – £150 per linear metre for everything, which is usually better value than separate visits.

Likely extras

Scaffolding or tower access • repairing rotten rafter ends/under-cloak • replacing or re-bedding verge tiles (if not using dry-fix) • additional downpipes at the eaves • waste/skip charges where applicable.

Standards, ventilation & compliance

Bargeboard replacement itself doesn’t normally require Building Regulations sign-off, but good practice is to ensure correct eaves ventilation at the adjoining soffit/fascia. If any old soffits near the box ends are suspected asbestos cement, they must be handled and disposed of by licensed specialists. Choose insured installers (ideally TrustMark or recognised trade-body members) and get written product and workmanship warranties.

Get free bargeboard quotes

If your gable ends look tired or you’re seeing cracked verge mortar, it’s a great time to upgrade to uPVC bargeboards — and consider dry-fix verges for a long-term, mortar-free finish. Request free, no-obligation quotes from trusted local roofline specialists and compare board thickness, trims, verge system, access method and warranties.


uPVC Bargeboards – FAQs

What’s the difference between bargeboards and fascias?
Fascias run horizontally along the eaves and carry the gutters. Bargeboards run up the sloping gables and finish the verge.

Do I need dry-fix verges when replacing bargeboards?
Not essential, but highly recommended. Dry-fix systems replace brittle mortar with mechanically fixed, ventilated caps for a neater appearance and better longevity.

What thickness should the boards be?
Use 16 mm replacement boards for full replacement; 9 mm capping boards are only for covering sound timber.

How long do uPVC bargeboards last?
Quality boards often carry 10–20-year guarantees and last much longer with simple cleaning.

Will new bargeboards stop birds getting under the tiles?
Combined with a correct dry-fix verge or repaired under-cloak, they significantly reduce gaps that birds exploit.

Can I just paint my old bargeboards instead?
You can, but paint rarely lasts long on weathered timber at height. Replacement avoids repeated scaffolds and maintenance.

How long does installation take?
A single gable typically takes half a day to a day depending on height, verge condition and access. Larger or multiple gables take longer.

Can I match the colour to my windows and gutters?
Yes—most systems offer white, black, anthracite and woodgrain foils to match fascias, soffits, gutters and even window colours.